Security Camera Installation · Los Angeles, CA
Business IP camera systems designed after a site walk, cabled and installed properly, and set up for secure viewing on your phone by a team that also runs your network.
Quick answer
Professional security camera installation covers the site survey, camera selection and placement, cabling to each camera, mounting, recorder or cloud setup, remote viewing on phones and computers, and testing day and night views. For businesses, it should also include secure network setup so cameras don't become a way into your network.
Los Angeles IT installs commercial security camera systems for Los Angeles businesses from our Century City headquarters. Because we're an IT company, the network, PoE switches, and remote access are set up properly, not left for someone else to figure out. Installations are quoted after a site walk, and service work is $95 per hour.
What's Included
Camera systems designed around what you need to see, and installed so they keep working.
IP security camera systems designed for offices, warehouses, retail stores, restaurants, and multi-tenant buildings.
Commercial cameras →/ 02Weatherproof, vandal-resistant cameras for parking lots, loading docks, and entrances, plus discreet dome cameras inside.
Camera placement →/ 03Cat6 runs to every camera with Power over Ethernet, so each camera gets power and data on one cable, tested and labeled.
Data cabling →/ 04Network video recorders sized for your retention needs, or cloud-managed recording, with storage you can actually search.
Recording →/ 05Live and recorded video on your phone or computer, set up securely without exposing the recorder to the internet.
Remote viewing →/ 06Person and vehicle detection, line crossing, and motion zones that send useful alerts instead of constant false alarms.
Smart alerts →/ 07Old analog and DVR systems replaced with HD IP cameras, reusing existing cable where it makes sense.
Upgrades →/ 08Cameras tied to door access and intercoms, so every door event has video attached to it.
Door access →/ 09Repairs, firmware updates, recorder health checks, and footage retrieval when you need to pull a clip fast.
Support →Old CCTV vs. Modern IP
Many businesses still run grainy DVR systems that nobody can access remotely. Here's what changes with an IP system.
| IP camera system | Older analog CCTV | |
|---|---|---|
| Image quality | ✓ HD to 4K, readable faces and plates | Low resolution |
| Power and data | ✓ One PoE cable per camera | Separate power and coax |
| Remote viewing | ✓ Secure phone and web access | Limited or none |
| Search footage | ✓ Search by person, vehicle, or time | Scroll through hours of video |
| Alerts | ✓ Smart detection alerts | Basic motion, many false alarms |
| Expansion | ✓ Add cameras to the network | Limited by DVR channels |
How It Works
A camera system is only as good as its planning. We decide placement before a single hole is drilled.
STEP 01
We walk your property, review entrances, parking, registers, and blind spots, and agree on what each camera must capture.
STEP 02
You get a camera layout, equipment list, storage plan, and a fixed quote for the installation.
STEP 03
We run and test PoE cabling, mount and aim cameras, set up the recorder or cloud platform, and secure the network.
STEP 04
We set up viewing on your phones, show staff how to find and export footage, and support the system afterward.
Pricing
The cost of a business camera system depends on the number of cameras, camera types, cable distances, mounting heights, and how much video you need to keep. Every quote starts with a site walk, so the price reflects your building, not a guess.
After installation, repairs, adjustments, footage retrieval, and changes are $95 per hour. Clients on our managed IT plans (from $300/month) can include camera system monitoring and updates alongside their network.
Security Cameras
Tell us about your property and what you need to see. We'll schedule a site walk and send a layout and quote.
Camera Placement
Good coverage starts at the points every person and vehicle passes: entrances, exits, loading docks, parking lot entries, and cash handling areas. Cameras at doors should be mounted to capture faces, not the tops of heads, and parking cameras need the right lens to read plates at the distance involved.
Inside, we focus on lobbies, hallways, stock rooms, and server or network closets. We avoid areas where people expect privacy, such as restrooms and break rooms used for changing.
IT-Grade Installation
Security cameras are network devices, and badly configured ones are a common way attackers get into business networks. We put cameras on their own VLAN, change default passwords, keep firmware updated, and set up remote viewing without opening ports on your firewall.
We also size PoE switches and recorder storage correctly, so cameras don't drop offline and footage is still there when you need it. See our network infrastructure and data cabling services.
By Industry
Retail stores and restaurants need clear views of registers, entrances, and back doors. Warehouses and manufacturers need coverage of docks, yards, and inventory. Offices and medical practices usually focus on entrances, lobbies, and after-hours access.
We pair cameras with door access control and video intercoms so you can see who is at the door, let them in, and have the event recorded.
Local Installers
Los Angeles IT installs security cameras for businesses across Los Angeles, including Century City, Downtown LA, Santa Monica, Beverly Hills, the San Fernando Valley, and the South Bay, plus Orange County and the Inland Empire. Installations are done onsite from our 10 LA County hubs.
Cameras are one part of our low voltage services, so cabling, Wi-Fi, door access, and the network can all be handled by one team.
Why Los Angeles IT
Planned
You approve what each camera should capture before installation starts.
Secure
Cameras isolated, updated, and accessed securely.
Certified
Technicians with CompTIA Security+, Network+, and A+, plus Microsoft and Cisco certifications, who explain risk in plain English.
Industries
Retail, restaurants, healthcare, warehouses, offices, and schools across Los Angeles rely on camera systems we install and support.
Service Areas
Onsite installation and service come from these locations:
We provide security camera installation in Los Angeles, Century City, Downtown LA, Santa Monica, Beverly Hills, West Hollywood, Culver City, El Segundo, Pasadena, Glendale, Burbank, the San Fernando Valley, Long Beach, Torrance, West Covina, and Santa Clarita, plus Orange County, the Inland Empire, and San Diego County. View all service areas →
Client Reviews
“The customer service from Los Angeles IT is on another level. Any time we’ve had an issue, their fast response time has kept our business from missing a beat. Bonus points for being budget-friendly too.”
“Rod and his team are my go-to IT solutions help. Available all the time, very professional, prompt and super capable for all challenges and IT needs we’ve had. Highly recommend!”
“I can’t say enough good things about the folks at Los Angeles IT. Their techs are personable and sharp, and they always follow up to make sure everything is working. Best part? Our IT costs have gone down while our systems run better than ever.”
“Such great service! He made the entire process feel seamless and stress-free, always ready to answer any questions with patience and clarity. It’s rare to find someone who combines technical expertise with such genuine customer care.”
“Los Angeles IT is an incredibly professional company. Rod and his team came in, updated our phone systems, and revamped our computer setups. Now, everything is organized and runs smoothly.”
“I must highlight the owner, Rod, who truly embodies the essence of an IT wizard. His deep understanding of technology and ability to troubleshoot any issue is remarkable.”
“Been working with Rod and his team for three years now. He’s responsive, helpful and very patient with me when I need help on minor things!”
“Rod is a godsend. He helped us set up our home office to be efficient and user-friendly. He was responsive, easy to work with and reasonably priced. Highly recommended.”
FAQ
It depends on the number of cameras, camera types, cable distances, mounting heights, and recording retention. We quote after a site walk so the price reflects your building. Service work afterward is $95 per hour.
Traditional CCTV uses analog cameras and coax cable to a DVR. IP cameras send high-resolution digital video over network cable, usually with Power over Ethernet, and support remote viewing and smart detection.
Yes. We set up secure mobile and web viewing for live and recorded video, without opening ports on your firewall.
Retention depends on the number of cameras, resolution, and storage size. We size the recorder or cloud plan for the number of days you need to keep.
Sometimes. Existing Cat5e or Cat6 can often be reused, and some systems can work over existing coax with adapters. We test and tell you what's reusable during the site walk.
Yes. We install weatherproof, vandal-resistant cameras for parking lots, entrances, loading docks, and building perimeters.
Yes. Integrating cameras with door access means every badge swipe or door event can be paired with video.
California generally requires consent from all parties to record confidential conversations, so most business camera systems are set up for video only. Check with your attorney for your specific situation.
Yes. We replace analog DVR systems with HD IP cameras and a modern recorder or cloud platform, and reuse cable where it makes sense.
They can be when left with default passwords and old firmware. We isolate cameras on their own network segment, update firmware, and set up secure remote access.
Yes. We handle repairs, adjustments, footage retrieval, and updates at $95 per hour, or as part of a managed IT plan.
We install security cameras across Los Angeles County, Orange County, the Inland Empire, and San Diego County.
Related Services
Call a Los Angeles IT technician to schedule a site walk.